products

Products

>> Multichannel Dichroic Prism

 THREE CHANNEL PRISM - P/N 9901 

General Description

click to download a pdf document relative to product

This is an RGB prism especially designed for matrix camera application as reported in the layout drawing. The possibility to accept a quite high F/N of the lens is the condition to have a good signal at the output of the camera for every channel. Is possible, upon request, to provide some trimming filter to define better or differently the output wavelength.

The IR cut off filter is always supplied and mounted in front of the prism if not otherwise specified by the customer. In the attached questionnaire, the customer can define properly the specification if different to this standard product.

Optical Parameters & Values
  • Optical Path: 51.973 mm
  • Equivalent Path in Air: 29.5 mm
  • Clear Aperture: 38x20 mm
  • Max acceptable F/N:2
  • Max acceptable Detector:15x20
  • Wavelength range: 430÷680nm
  • N.° of output channel:3
  • Antireflection coating:R<0.4
  • Type of coating:Dichroic
  • 1st output:430÷495nm
  • 2nd output:495÷600nm
  • 3rd output:600÷680nm
  • 4th output:N.A.
  • 5th output:N.A.
  • Transmission:>80%
  • Dimensions: 44x52x65mm
  • Mount type: F Mount Bayonet
  • Weight: 160 gr
  • Options
  • Support:Ironsteel
  • Interface:upon request
  • Mount type:upon request
  • Output trimming filter:upon request
  • 1st output:not provided
  • 2nd output:not provided
  • 3rd output:N.A.
  • 4th output:N.A.
  • 5th output:N.A.

Outline Dimensions

The solution reported is the best compromise between the performances and dimensions, mainly about the optical path in glass because related to the back focal length of the lenses. The equivalent air thickness is the same of the photographic standard lens .

Technical Notes

The angle are also optimised to minimise the polarisation effects. The dielectric film is designed in order to minimise the shifting of the curves ( vs the angle of incidence ) providing a good results for nominal angle ±10 degrees. Good transmission and coating repeatability are the warranty for the final product performances. More details are available for the customer upon request

technical draft

technical draft